Attenuators - Interconnects 30 dB Fixed Attenuator, SMA Male to SMA Female Unidirectional Black Anodized Aluminum Body Rated to 10 Watts Up to 12.4 GHz

Attenuators - Interconnects 30 dB Fixed Attenuator, SMA Male to SMA Female Unidirectional Black Anodized Aluminum Body Rated to 10 Watts Up to 12.4 GHz

Signal Conditioning 10 MHz to 2.5 GHz SMA Bias Tee Rated to 2500 mA and 100 Volts DC

Signal Conditioning 10 MHz to 2.5 GHz SMA Bias Tee Rated to 2500 mA and 100 Volts DC

RF Amplifier 2 dB NF Low Noise Amplifier, Operating from 20 MHz to 4 GHz with 25 dB Gain, 18 dBm P1dB and SMA

RF Amplifier 2 dB NF Low Noise Amplifier, Operating from 20 MHz to 4 GHz with 25 dB Gain, 18 dBm P1dB and SMA

Coaxial Switches SP4T, Electromechanical Relay Latching Switch, DC to 43 GHz, 28VDC, 5W, Reset, D-Sub, 2.92mm

Coaxial Switches SP4T, Electromechanical Relay Latching Switch, DC to 43 GHz, 28VDC, 5W, Reset, D-Sub, 2.92mm

RF Terminators 1 Watt RF Load Up to 6 GHz With Reverse Polarity

RF Terminators 5 Watt RF Load Up to 18 GHz With N Female Input Black Anodized Aluminum Heatsink

RF Terminators 5 Watt RF Load Up to 18 GHz With N Female Input Black Anodized Aluminum Heatsink

RF Cable Assemblies 2.2-5 Male to 4.3-10 Male Right Angle Low PIM Cable 150 CM Length Using 1/4 inch Superflexible Coax

RF Cable Assemblies 2.2-5 Male to 4.3-10 Male Right Angle Low PIM Cable 150 CM Length Using 1/4 inch Superflexible Coax

RF Amplifier 40 dB Gain, 25 dBm IP3, 0.8 dB NF, 11 dBm P1dB, 1 GHz to 2 GHz, Low Noise High Gain Amplifier SMA

RF Amplifier 40 dB Gain, 25 dBm IP3, 0.8 dB NF, 11 dBm P1dB, 1 GHz to 2 GHz, Low Noise High Gain Amplifier SMA

Attenuators - Interconnects 20 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 10 Watts Up to 26.5 GHz

Attenuators - Interconnects 20 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 10 Watts Up to 26.5 GHz

Attenuators - Interconnects 10dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel

Attenuators - Interconnects 10dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel

Signal Conditioning 2 Way SMA Power Divider From DC to 18 GHz Rated at 1 Watt

RF Amplifier 1.6 dB NF Input Protected Low Noise Amplifier, Operating from 30 MHz to 1.5 GHz with 29 dB Gain, 23 dBm P1dB and SMA

RF Amplifier 1.6 dB NF Input Protected Low Noise Amplifier, Operating from 30 MHz to 1.5 GHz with 29 dB Gain, 23 dBm P1dB and SMA

RF Cable Assemblies 2.2-5 Male to 4.3-10 Male Right Angle Low PIM Cable 12 Inch Length Using 1/4 inch Superflexible Coax

RF Cable Assemblies 2.2-5 Male to 4.3-10 Male Right Angle Low PIM Cable 12 Inch Length Using 1/4 inch Superflexible Coax

Signal Conditioning 4 Way 2.92mm Power Divider from 18 GHz to 40 GHz Rated at 20 Watts

Signal Conditioning 4 Way 2.92mm Power Divider from 18 GHz to 40 GHz Rated at 20 Watts

RF Connectors / Coaxial Connectors BNC Male Right Angle Connector Crimp/Solder Attachment for RG59, RG62, RG71

RF Connectors / Coaxial Connectors BNC Male Right Angle Connector Crimp/Solder Attachment for RG59, RG62, RG71

RF Amplifier Broadband Low Noise Amplifier, 1 KHz to 1000 MHz, 60 dB Gain, 1 dB Noise Figure, +12V, SMA

RF Amplifier Broadband Low Noise Amplifier, 1 KHz to 1000 MHz, 60 dB Gain, 1 dB Noise Figure, +12V, SMA

RF Terminators 5 Watt RF Load Up to 12.4 GHz With TNC Male Input Aluminum Body

RF Adapters - Between Series SMA Male to MCX Plug Adapter

Phase Detectors/Shifters Adjustable Phase Shifter, DC to 4GHz, With an Adjustable Phase of 90 Deg. Per GHz and SMA

Phase Detectors/Shifters Adjustable Phase Shifter, DC to 4GHz, With an Adjustable Phase of 90 Deg. Per GHz and SMA

RF Adapters - Between Series SMA Male to TNC Female Miter Right Angle Adapter, DC to 18 GHz

RF Adapters - Between Series SMA Male to TNC Female Miter Right Angle Adapter, DC to 18 GHz

RF Adapters - Between Series MMCX Jack to BNC Male Adapter

RF Terminators 2 Watt RF Load Up to 26.5 GHz with SMA Male Passivated Stainless Steel

RF Terminators 2 Watt RF Load Up to 26.5 GHz with SMA Male Passivated Stainless Steel

Attenuators - Interconnects 0 to 100 dB Step Attenuator with a 1 dB Step SMA Female Interface Rated Up to 3 GHz and Up to 2 Watts in a Dial Design

Attenuators - Interconnects 0 to 100 dB Step Attenuator with a 1 dB Step SMA Female Interface Rated Up to 3 GHz and Up to 2 Watts in a Dial Design

Signal Conditioning Adjustable Phase Trimmer, DC to 10 GHz, with an Adjustable Phase of 15 Deg. Per GHz and SMA Connectors, Brass Body

Signal Conditioning Adjustable Phase Trimmer, DC to 10 GHz, with an Adjustable Phase of 15 Deg. Per GHz and SMA Connectors, Brass Body

RF Adapters - In Series LC Male to LC Male Adapter